All cylinders are equipped with dry cylinder liner wear resistance.
Compressor has three throws and three cylinders in line, no string-cylinder, and the corresponding packing & the large end bush with the maintenance window, and set up in the skid side, good maintainability.
Small installation area, easy to transport, saving investment.
Two-throw symmetrical balanced horizontal units, throw's alternate angle to each other 180° the inertial force balance, the piston force distribution, performance and running balance.
By the finite element analysis software simulation load compressor design the overall movement of compressor body, the compressor body and midbody as a whole structure, uniform load transfer, the overall rigid body excellent.
Compressor body with windows for disassembly and inspection of crosshead, etc., to facilitate inspection and maintenance.
Compressor body with oil level gauge, if necessary, can be equipped with platinum thermal resistance and electric heaters, oil testing, oil level, and interlock with the unit running.
With pre-lube oil pump, moving parts of a mandatory pre-lubrication to ensure a reliable operation. D type compressor can be adapted in daughter station, mother station and standard station.
M-type (4-throw or 6-throw above) symmetrical balance compressor is the best balance of performance one in various types of piston compressor.
The inertia force (a first and second order) and the moment of inertia can be completely balanced, uniform shear force, in particular a smooth operation.
The strength of the relative two throws piston in opposite directions, offsetting each other, thereby substantially improving the neck axis (bearing) stress conditions, a decrease of the main axis between the neck and main bearing wear and prolongs the service life.
The more throws, and can be one throw for one stage, one stage for one cylinder. Rigid run good, fast and convenient maintenance overhaul.
Adapt to the larger discharge capacity, the needs of multi-stage compression is the large discharge capacity of gas or CNG mother station with the best type of compressor.
Piston Gas Compressor Technical Parameters
DENAIR Piston Gas Compressor Customer Case
You Can Find Our Reciprocation Gas Compressors In Most Industries
DENAIR Factory
At DENAIR, we earn our customers' trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. DENAIR has been exporting to more than 90 countries across the globe. We have sales representatives who can speak English, Spanish, French, Russian and Arabic, which makes it easier for our clients from all over the world to interact and negotiate with us.
DENAIR Piston Gas Compressor Production Flow & Packakaging & Shipping
FAQ
Q1: Are you factory or trade company?
A1: We are factory.
Q2: What the exactly address of your factory?
A2: Our company is located in No. 6767, Tingfeng Rd. Jinshan District, Shanghai 201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, Pinghu, Zhejiang Province, China
Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the mach
Basic Info.
Model NO. ZW-1.1/10-250 Refrigerant Type Freon Compression Stage 4 Stage Pressure 250 Bar Medium Natural Gas Throw 2/4 Discharge Capacity 21-54 M3/Min Discharge Pressure 28-37 Bar Weight 23400-69500 Kg Piston Force 120-160 Kn Power 450-1250 Kw Voltage 6000-10000V Speed 333 R/Min Configuration Z/M/D Trademark DENAIR Transport Package Export Standard Packing Specification CE, ISO9001, TUV, GC certification Origin China HS Code 8414809090Product Description
Customer Question & Answer Ask something for more details (0)
Z(vertical) type compressor cylinder which do not bear the weight of the working conditions of piston is conducive to high-pressure cylinder without oil lubrication structural design, no oil (less oil) lubrication operation, higher mechanical efficiency, extended service life of cylinder and piston rings to reduce the running costs.
All cylinders are equipped with dry cylinder liner wear resistance.
Compressor has three throws and three cylinders in line, no string-cylinder, and the corresponding packing & the large end bush with the maintenance window, and set up in the skid side, good maintainability.
Small installation area, easy to transport, saving investment.
Two-throw symmetrical balanced horizontal units, throw's alternate angle to each other 180° the inertial force balance, the piston force distribution, performance and running balance.
By the finite element analysis software simulation load compressor design the overall movement of compressor body, the compressor body and midbody as a whole structure, uniform load transfer, the overall rigid body excellent.
Compressor body with windows for disassembly and inspection of crosshead, etc., to facilitate inspection and maintenance.
Compressor body with oil level gauge, if necessary, can be equipped with platinum thermal resistance and electric heaters, oil testing, oil level, and interlock with the unit running.
With pre-lube oil pump, moving parts of a mandatory pre-lubrication to ensure a reliable operation. D type compressor can be adapted in daughter station, mother station and standard station.
M-type (4-throw or 6-throw above) symmetrical balance compressor is the best balance of performance one in various types of piston compressor.
The inertia force (a first and second order) and the moment of inertia can be completely balanced, uniform shear force, in particular a smooth operation.
The strength of the relative two throws piston in opposite directions, offsetting each other, thereby substantially improving the neck axis (bearing) stress conditions, a decrease of the main axis between the neck and main bearing wear and prolongs the service life.
The more throws, and can be one throw for one stage, one stage for one cylinder. Rigid run good, fast and convenient maintenance overhaul.
Adapt to the larger discharge capacity, the needs of multi-stage compression is the large discharge capacity of gas or CNG mother station with the best type of compressor.
Piston Gas Compressor Technical Parameters
| S/No. | Model | Suction pressure MPaG | Discharge pressure MPaG | Discharge Capacity Sm3/h | Stage | Motor Power (KW) | Overall Dimensions |
| 1. | ZW-4.3/1-250 | 0.1 | 25 | 480 | 4 | 110 | 3950×1750×2100 |
| 2. | ZW-5.0/1-250A | 0.1 | 25 | 560 | 4 | 132 | 3950×1750×2100 |
| 3. | ZW-7.5/1-250 | 0.1 | 25 | 800 | 4 | 185 | 3950×1750×2100 |
| 4. | ZW-5.5/2-250 | 0.2 | 25 | 900 | 4 | 185 | 3950×1750×2100 |
| 5. | ZW-2.5/3-250 | 0.3 | 25 | 570 | 4 | 110 | 3950×1750×2100 |
| 6. | ZW-3/3-250 | 0.3 | 25 | 680 | 4 | 132 | 3950×1750×2100 |
| 7. | ZW-3.9/3-250 | 0.3 | 25 | 900 | 4 | 185 | 6000×2350×2300 |
| 8. | ZW-3.3/210 | normal pressure | 21 | 180 | 4 | 55 | 7000×2240×2220 |
| 9. | ZW-7.5/210 | normal pressure | 21 | 400 | 5 | 110 | 7000×2240×2220 |
| 10. | ZW-6/210 | normal pressure | 21 | 300 | 5 | 90 | 7000×2240×2220 |
| 11. | ZW-5/210 | normal pressure | 21 | 250 | 5 | 75 | 7000×2240×2220 |
| 12. | ZW-4/2-210 | 0.2 | 21 | 680 | 4 | 132 | 7000×2240×2220 |
| 13. | ZW-3.2/2-210 | 0.2 | 21 | 500 | 4 | 110 | 7000×2240×2220 |
| 14. | ZW-5/2-210(Y) | 0.2 | 21 | 800 | 4 | 185 | 7000×2240×2220 |
| 15. | ZW-1.1/10-250 | 1 | 25 | 680 | 3 | 110 | 3950×1750×2100 |
| 16. | ZW-0.7/20-350 | 2 | 35 | 800 | 3 | 110 | 3950×1750×2100 |
| 17. | ZW-5.8/1.7-250 | 0.17 | 25 | 900 | 4 | 185 | 3950×1750×2100 |
| 18. | ZW-6/0.35-250 | 0.035 | 25 | 450 | 5 | 110 | 3950×1750×2100 |
| 19. | ZW-7.2/0.35-250 | 0.035 | 25 | 640 | 5 | 160 | 3950×1750×2100 |
| 20. | ZW-5.1/0.56-250 | 0.056 | 25 | 460 | 5 | 110 | 3950×1750×2100 |
| 21. | ZW-6.2/0.56-250 | 0.056 | 25 | 550 | 5 | 132 | 3950×1750×2100 |
| 22. | W-3/1-250 | 0.1 | 25 | 340 | 4 | 75 | 3600×2200×2100 |
| 23. | W-1/10-250 | 1 | 25 | 620 | 3 | 90 | 3600×2200×2100 |
| 24. | W-1.2/10-250 | 1 | 25 | 750 | 3 | 110 | 3600×2200×2100 |
| 25. | W-1.4/10-250 | 1 | 25 | 880 | 3 | 132 | 3600×2200×2100 |
| 26. | W-1.7/10-250 | 1 | 25 | 1100 | 3 | 160 | 3600×2200×2100 |
| 27. | W-2/10-250 | 1 | 25 | 1250 | 3 | 185 | 3600×2200×2100 |
| 28. | D-1.2/10-250 | 1 | 25 | 750 | 3 | 110 | 4000×2600×1250 |
| 29. | D-1/10-250 | 1 | 25 | 600 | 3 | 90 | 4000×2600×1250 |
| 30. | D-0.8/10-250 | 1 | 25 | 500 | 3 | 75 | 4000×2600×1250 |
| 31. | D-0.6/10-250 | 1 | 25 | 350 | 3 | 55 | 4000×2600×1250 |
| 32. | D-0.20/30-250 | 3~20 | 25 | 1100 | 2 | 55 | 4500×2700×2600 |
| 33. | D-0.25/30-250 | 3~20 | 25 | 1530 | 2 | 75 | 4500×2700×2600 |
| 34. | D-0.29/30-250 | 3~20 | 25 | 1800 | 2 | 90 | 4500×2700×2600 |
| 35. | D-1.3/65-250 | 6.5 | 25 | 5000 | 2 | 315 | 5000×3000×2250 |
| 36. | D-1.4/60-250 | 6 | 25 | 4850 | 2 | 315 | 5000×3000×2250 |
DENAIR Piston Gas Compressor Customer Case
You Can Find Our Reciprocation Gas Compressors In Most Industries
DENAIR Factory
At DENAIR, we earn our customers' trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. DENAIR has been exporting to more than 90 countries across the globe. We have sales representatives who can speak English, Spanish, French, Russian and Arabic, which makes it easier for our clients from all over the world to interact and negotiate with us.
