| Post Date: | Dec 07,2021 |
| Expiry Date: | Jun 05,2022 |
| Detailed Description: |
Price:7.14 USD Metric Tons Payment Method: L/C, T/T Descriptions The common outdoor anticorrosion protective coating is exposed to suffer the sun's ultraviolet irradiation. In general, it will turn yellow after three months, pulverization after six months. It not only influence the appearance, but also lower the protective performance of the coating. The two components industrial anticorrosion protective UV resistance top coating developed by SWD Urethane Co., USA can bear long-term irradiation of sunshine, high weather resistance performance, without color change, pulverization and peel off after long term outdoor use, it has been widely used and well received by customers in many districts in the Americas and Europe. Characteristics Coating is dense, tough, full bright, colorful without yellowing and pulverization, anti-aging, with excellent weather resistance luster and color retention and decoration. Film coating has high adhesive strength, nice physical performances, high properties of wear resistance, impact strength, wet resistance and anticorrosion salt spray resistance performance, stable chemical resistance. It has good compatibility with polyurethane, epoxy, chlorinated rubber, alkyd, phenolic and other paintings with recoating interval is unlimited. Specifications Adhesive strength 11.3Mpa Impact resistance ≥50kg•cm Temperature variation -30------+150℃ Wear resistance（700g/500r） 10mg Acid resistance 35%H2SO4 or 15%HCI, 30d no rust no bubbles no peel Alkali resistance 30%NaOH, 30d no rust no bubbles no peel Salt resistance 100g/L, 30d no rust no bubbles no peel Salt spray resistance 2000h no rust no bubbles no peel Oil resistance 0# diesel Crude oil 30d no rust no bubbles no peel Data of performance Color Multiple colors as customers’ need Luster half glazed Density 1.06g/cm3 (mixed up) Volume solid content 81%±2% VOC ≤173g/L Recommended dry film thickness 50-100μm Theoretical coverage 0.13kg/sqm Practical coverage Allow appropriate loss rates Dry time 1-3h Overcoating interval min: 3h, max: unlimited Overcoating method Airless spray, Air spray, Brush, Roller Flash point 53℃ |
